Physics Mods [1.6.x] – For Manual Drivers

V 3.4 Mod für American Truck Simulator

0
Downloads heute
613
Downloads gesamt
0
Kommentare

Beschreibung

Hi guys, This physics change the transmission feel and suspension.

Also, that is new with this update. You have the option to have Trucks Cabin Suspension. Should work with other truck. unless the other mod touch cabin and chassis files.

It only have two truck that are from SCS trucks only:
Peterbilt 389 SCS
Kenworth W900 SCS

It active the Cabin Suspension like a real one (I don’t know why they are deactivate.)
So when going on over bump or you just turning, the cabin will start to move, and suspension starting to bouncing around.

Still in work in progress for this new update !

_____________________________________________________

#For the transmission:

– The only thing is change is the clutch friction are decrease (was 0.5 now at 0.65) For Manual H shifter only.

– I also changed something about the torque that when you decrease the value, the torque of your truck will changed.
– For example, if you have 2500lb of torque, changing this value will not be the same, So what I did is put it back to 1.0.
– so you have the 100% of the torque number and change it for the Scaling of the Flywheel.
– The more heavier the flywheel is the more the RPM will drop slower.
– Like a stock flywheel than a Aftermarket lightweight flywheel. (Car related)

– For the Sequential and Automatics mode is still in Work in Progress.
– Value are not stock, So you might seen some change.
– Trying to make the transmission change smoother

#For suspension:

– Now the trailer and truck can roll and pitch separately at 30 degrees at both direction.
– What it mean is if the truck roll on a bump. The truck will roll itself only and not the trailer and the truck.
– The trailer will stay at his normal position (can pitch or roll so take care)

– The suspension are little bit softer than stock physics.
– That mean that the truck will re-bounce when going on a bump (No to much much than last time)
– That give it a little bit of realistic.

– Now you see the truck shake in the cabin when you go over a bump or something else

#Other Physics

– I also change the Mass of the truck and wheels.
– The Truck Mass was 2300 now is 1800
– The wheel mass of the truck was 300 now at 200.
– Two SCS Trucks that now have cab suspension. (option)

– Still in WIP !

The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controllers !

I can update the mod for you if you want !

Any bug or question ? Just tell me on Facebook: https://www.facebook.com/Jad.Gang97

Credits:
SCS, oXyDe.DRIVERS

Credits

Modell: SCS, oXyDe.DRIVERS
Textur: SCS, oXyDe.DRIVERS
Script: SCS, oXyDe.DRIVERS
Idee / Konzept: SCS, oXyDe.DRIVERS
Tester: SCS, oXyDe.DRIVERS
Sonstige: SCS, oXyDe.DRIVERS

Änderungen

  • 22. April, 03:56 Uhr
    Version 3.4

    V3.4: Just some fixes here and here for the 1.31+ Nothing huges has been done.

    No video for this V3.2 updates, but sgo see the V3.1 video for more info. it’s pretty much the same thing as this update, just some fixes and little modification.

    V3.3: Re done the physics from A to Z and use some of the number from the v2.3 of my mods.

    – Work with 4 trucks for now:
    Peterbilt 389 SCS
    Peterbilt 579 SCS
    Kenworth W900 SCS
    Kenworth T680 SCS

  • 07. Februar, 18:53 Uhr
    Version 3.3

    Hi guys, This physics change the transmission feel and suspension.

    – Work with 4 trucks for now:
    Peterbilt 389 SCS
    Peterbilt 579 SCS
    Kenworth W900 SCS
    Kenworth T680 SCS

    – V3.2: Updated for the V1.30 and some minor fixes.

    No video for this V3.2 updates, but sgo see the V3.1 video for more info. it’s pretty much the same thing as this update, just some fixes and little modification.

    – V3.3: Re done the physics from A to Z and use some of the number from the v2.3 of my mods.

    – Still in WIP !

    The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

    Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controlers !

    I can update the mod for you if you want !

    Credits:
    SCS, oXyDe DRIVERS

  • 04. Januar, 14:39 Uhr
    Version 3.1

    Hi guys, This physics change the transmission feel and suspension.

    – Work with 4 trucks for now:
    Peterbilt 389 SCS
    Peterbilt 579 SCS
    Kenworth W900 SCS
    Kenworth T680 SCS

    V2.9: Every thing whas redone from A to Z. Updated version of the physics folders.

    Suspension was redone on SCS trucks (ish), Transmission, Tires slip are less then the 2.8, Everything has bean touch. Latest SCS physics update.

    V3.1: Suspension, truck cabin and transmission was reworked.

    Everything is done and tested with SCS 389.

    – Still in WIP !

    The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

    Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controlers !

    I can update the mod for you if you want !

    Any bug or question ? Just tell me on Facebook: https://www.facebook.com/Jad.Gang97

    Credits:
    SCS, oXyDe DRIVERS

  • 13. Dezember, 21:47 Uhr
    Version 3.0

    Hi guys, This physics change the transmission feel and suspension.

    – Work with 4 trucks for now:
    Peterbilt 389 SCS
    Peterbilt 579 SCS
    Kenworth W900 SCS
    Kenworth T680 SCS

    V2.9: Every thing was redone from A to Z. Updated version of the physics folders.

    Suspension was redone on SCS trucks, Transmission, Tires slip are less then the 2.8, Everything has bean touch. Latest SCS physics update.

    V3.0: Suspension, truck cabin and transmission was reworked.

    Everything is done and tested with SCS 389.

    – Still in WIP !

    The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

    Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controlers !

    I can update the mod for you if you want !

    Credits:
    SCS, oXyDe DRIVERS

  • 11. Dezember, 02:56 Uhr
    Version 2.9

    Truck Physics v 2.9 for Manual

    Hi guys, This physics change the transmission feel and suspension.

    – Work with 4 trucks for now:
    Peterbilt 389 SCS
    Peterbilt 579 SCS
    Kenworth W900 SCS
    Kenworth T680 SCS

    Every thing is change on the physics V2.9.

    Supension was redone on SCS trucks (ish), Transmission, Tires slip are less then the 2.8, Everything has been touch. Latest SCS physics update.

    Everything was redone and tested with SCS 389.

    – Still in WIP !

    The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

    Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controlers !

    I can update the mod for you if you want !

    Any bug or question ? Just tell me on Facebook: https://www.facebook.com/Jad.Gang97

    Credits:
    SCS, oXyDe DRIVERS

  • 17. November, 23:26 Uhr
    Version 2.8

    ***THIS MOD IF FOR MANUAL USER WITH CLUTCH PEDAL***

    Hi guys, This physics change the transmission feel and suspension.

    [UPDATE]: That is new in this update v2.5.
    – Work with 4 trucks for now:
    Peterbilt 389 SCS
    Peterbilt 579 SCS
    Kenworth W900 SCS
    Kenworth T680 SCS

    #For the transmission:

    – The clutch engage at very low, but is still easy to use.
    – Transmission have now some little bit of resistance.
    – The RPM will take time to go down in RPM. (You are at 1500RPM, it will take more time to go at 1000RPM then stock physics.).
    – More coming out for the Transmission.

    #For the Suspension:

    – Now you have cabin mouvement like real truck (I don’t why it was deactivated.)
    – Cabin suspension work with SCS Truck for now.
    – Wheel suspension travel is increase.
    – OLD: Now the trailer will and roll by it self and not being one piece with the truck
    – You may see the cabin moving when turning or going on something.
    – Now wheel can slip, so be carefull

    #Others:

    – Now tires can slip, so be carefull.

    – Still in WIP !

    The goal is that I want to make the “worst” physics to a “real feel” physics, I never drive a real truck in real life, but I can make it from Youtube Video.

    Recommended to use with a steering wheel and clutch pedal, but you can use this mod with other controlers !

    I can update the mod for you if you want !

    Any bug or question ? Just tell me on Facebook: https://www.facebook.com/Jad.Gang97

    Credits:
    SCS, oXyDe DRIVERS

  • 21. Juli, 20:55 Uhr
    Version 2.3

Bilder

  • 857684
    von mods80
    vor 2 Monate
  • 851418
    von mods80
    vor 5 Monate
  • 848229
    von mods80
    vor 6 Monate
  • 846097
    von mods80
    vor 6 Monate
  • 845905
    von mods80
    vor 6 Monate
  • 842962
    von mods80
    vor 7 Monate
  • 829422
    von mods80
    vor 11 Monate


Videos



Dateien

21.07 2017
Modhoster Userbewertung
keine Bewertung Stimmen

Empfehlungsrate

-/-      
noch nicht genug Stimmen

Ist dieser Mod besonders empfehlenswert?

Weitere Mods von mods80

next previous
Beschwerde: diesen Mod melden
V 3.4
American Truck Simulator
ATS_Physics_Manual_-_V3.4.scs
95,0 KB 56
22. April 56
V 3.3
American Truck Simulator
Physics_V3.3.rar
9,6 KB 95
07. Februar 95
V 3.1
American Truck Simulator
Physics_V3.1_-_ATS.rar
9,3 KB 101
04. Januar 101
4 ältere Versionen

0 Kommentare

Um Kommentare schreiben zu können musst du dich einloggen.
Du kannst dich auch kostenlos registrieren, falls du noch keinen Account hast - dauert nur eine Minute.

Noch keine Kommentare vorhanden.

Schreibe den ersten Kommantar...

      } Plista_widget&sz=1x1&t=&c=1529726996